TRANSFER CASE FRONT OIL SEAL(for RH Side) REPLACEMENT

PROCEDURE


  1. DRAIN TRANSFER OIL

    Click here

  2. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH

    Click here

  3. REMOVE TRANSFER CASE OIL SEAL RH


    1. A00285JN05

      Using SST, remove the transfer case oil seal RH from the transfer assembly.

      SST
      09308-00010

      Note

      Do not damage the transfer case oil seal RH contact surface to the transfer assembly.

  4. INSTALL TRANSFER CASE OIL SEAL RH


    1. A002A5RN08

      Using SST and a hammer, install a new transfer case oil seal RH as shown in the illustration.

      SST
      09950-60010   ( 09951-00350, 09951-00580, 09952-06010 )
      09950-70010   ( 09951-07150 )
      Standard Depth
      33.5 to 34.5 mm (1.32 to 1.35 in.)

      Note


      • Tap in the transfer case oil seal RH uniformly so that the transfer case oil seal RH is straight.

      • Do not tap in the transfer case oil seal RH in too far.

    2. Apply a small amount of MP grease to the lip of the transfer case oil seal RH.

  5. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH

    Click here

  6. ADD TRANSFER OIL

    Click here

  7. INSPECT TRANSFER OIL LEAK