FUEL PUMP ECU INSTALLATION

PROCEDURE

1. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY

   
   

   1. Install the fuel pump control ECU assembly with the 2 nuts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Connect the fuel pump control ECU assembly connector.

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

   Click here

3. INSTALL ROPE HOOK (for LH Side)

   Click here

4. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side)

   Click here

5. INSTALL DECK TRIM POCKET COVER (for LH Side)

   Click here

6. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

   Click here

7. INSTALL NO. 2 DECK SIDE TRIM COVER

   Click here

8. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

   Click here

9. INSTALL FRONT DECK SIDE TRIM COVER LH

   Click here

10. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

11. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

12. INSTALL REAR OUTER SEAT TRACK BRACKET COVER LH

    Click here

13. INSTALL REAR NO. 2 SEAT ASSEMBLY

    Click here

14. INSTALL REAR FLOOR FINISH PLATE

    Click here

15. INSTALL REAR DECK FLOOR BOX

    Click here

16. INSTALL DECK SIDE TRIM BOX LH

    Click here

17. INSTALL TONNEAU COVER ASSEMBLY

    Click here

18. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

19. INSTALL DECK BOARD ASSEMBLY

    Click here

20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here