DRIVE BELT REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL RH

  2. SEPARATE FRONT FENDER LINER RH


    1. Remove the bolt, 4 screws and 4 clips and separate the front fender liner RH.

  3. REMOVE FRONT FENDER APRON SEAL RH

    Click here

  4. REMOVE V-RIBBED BELT


    1. A0029Y3C01
      *a 5 mm Bi-hexagon Wrench

      Release the V-ribbed belt tension by turning the V-ribbed belt tensioner counterclockwise.

    2. While turning the V-ribbed belt tensioner counterclockwise, align its holes, and then insert a 5 mm hexagon wrench into the holes to secure the V-ribbed belt tensioner.

    3. Remove the V-ribbed belt from the V-ribbed belt tensioner.