FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE V-RIBBED BELT

    Click here

  2. REMOVE CRANKSHAFT PULLEY


    1. A00271PC03
      *a Hold
      B003ZIE Turn

      Using SST, hold the crankshaft pulley in place and loosen the crankshaft pulley bolt. Further loosen the bolt until 2 or 3 threads are screwed into the crankshaft.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A00277UC03
      *a Hold
      B003ZIE Turn

      Using SST, remove the crankshaft pulley bolt and crankshaft pulley.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05021 )
    3. A002BYR

      Remove the pulley set key from the crankshaft.

  3. REMOVE TIMING CHAIN CASE OIL SEAL


    1. A00270HC03
      *a Protective Tape
      *b Cut Position

      Using a knife, cut off the lip of the timing chain case oil seal.

    2. Using a screwdriver, pry out the timing chain case oil seal.

      Note

      After removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

      Tech Tips

      Tape the screwdriver tip before use.