RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT INJECTOR RELAY (D INJ)

    A002ALTE01

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the injector relay (D INJ).

  2. INSPECT FUEL PUMP RELAY ASSEMBLY (FUEL PMP)

    A002ALTE01

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the fuel pump relay (FUEL PMP).