HEATED OXYGEN SENSOR(for Bank 1) REMOVAL

PROCEDURE


  1. REMOVE FRONT FLOOR COVER LH

    Click here

  2. REMOVE NO. 2 ENGINE UNDER COVER

    Click here

  3. REMOVE HEATED OXYGEN SENSOR (for 2WD)


    1. A0027QZC01
      *1 Wire Harness Clamp Bracket

      Disconnect the heated oxygen sensor connector.

    2. Disengage the 3 wire harness clamps.

    3. Remove the wire harness clamp bracket from the heated oxygen sensor.

    4. A002CA0N01

      Using SST, remove the heated oxygen sensor from the front No. 3 exhaust pipe sub-assembly.

      SST
      09224-00012

      Note

      If the heated oxygen sensor has been struck or dropped, replace it.

  4. REMOVE FRONT NO. 3 EXHAUST PIPE SUB-ASSEMBLY (for AWD)

    Click here

  5. REMOVE HEATED OXYGEN SENSOR (for AWD)


    1. A0027W7

      Remove the wire harness clamp bracket from the heated oxygen sensor.

    2. A0027VFN01

      Using SST, remove the heated oxygen sensor from the front No. 3 exhaust pipe sub-assembly.

      SST
      09224-00012

      Note

      If the heated oxygen sensor has been struck or dropped, replace it.