AIR FUEL RATIO SENSOR REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE AIR FUEL RATIO SENSOR (for Bank 2)


    1. A0029EK

      Disengage the 2 wire harness clamps.

    2. Disconnect the air fuel ratio sensor connector.

    3. A002CB3N01

      Using SST, remove the air fuel ratio sensor from the exhaust manifold assembly LH (TWC: Front Catalyst).

      SST
      09224-00012

      Note

      If the air fuel ratio sensor has been struck or dropped, replace it.

  3. REMOVE NO. 2 ENGINE UNDER COVER (for LHD)

    Click here

  4. REMOVE EXHAUST MANIFOLD (TWC: Front Catalyst) (for RHD)

    Click here

  5. REMOVE AIR FUEL RATIO SENSOR (for Bank 1)


    1. for LHD


      1. A00279S

        Disconnect the air fuel ratio sensor connector.

      2. Disengage the 3 wire harness clamps.

      3. A002C1XN01

        Using SST, remove the air fuel ratio sensor from the exhaust manifold (TWC: Front Catalyst).

        SST
        09224-00012

        Note

        If the air fuel ratio sensor has been struck or dropped, replace it.

    2. for RHD


      1. A0028GCN01

        Using SST, remove the air fuel ratio sensor from the exhaust manifold (TWC: Front Catalyst).

        SST
        09224-00012

        Note

        If the air fuel ratio sensor has been struck or dropped, replace it.