CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE INTAKE AIR SURGE TANK ASSEMBLY

    Click here

  2. REMOVE VVT SENSOR (for Intake Side of Bank 1)


    1. A002CDN

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.

      Note

      If the VVT sensor has been struck or dropped, replace it.

  3. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)


    1. A002CBT

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.

      Note

      If the VVT sensor has been struck or dropped, replace it.

  4. REMOVE VVT SENSOR (for Intake Side of Bank 2)


    1. A0029SJ

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly LH.

      Note

      If the VVT sensor has been struck or dropped, replace it.

  5. REMOVE VVT SENSOR (for Exhaust Side of Bank 2)


    1. A002AIC

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly LH.

      Note

      If the VVT sensor has been struck or dropped, replace it.