CAMSHAFT OIL CONTROL SOLENOID REMOVAL

PROCEDURE

1. REMOVE V-BANK COVER SUB-ASSEMBLY

   Click here

2. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 2)

   
   

   1. 

      Disconnect the camshaft timing oil control solenoid assembly connector.

   2. Using a 10 mm deep socket wrench, remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.

      Note

      If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

   3. Remove the O-ring from the camshaft timing oil control solenoid assembly.

      Note

      
      

      • If the O-ring comes off in the timing chain cover assembly, make sure to remove it.

      • Do not drop the O-ring into the timing chain cover assembly.

3. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY (for RHD)

   Click here

4. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

   Click here

5. SEPARATE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY (for RHD)

   Click here

6. REMOVE RESERVOIR BRACKET (for RHD)

   Click here

7. REMOVE NO. 2 ENGINE MOUNTING STAY RH

   Click here

8. REMOVE ENGINE MOVING CONTROL ROD BRACKET

   Click here

9. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 2)

   
   

   1. 

      Disconnect the camshaft timing oil control solenoid assembly connector.

   2. Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.

      Note

      If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

   3. Remove the O-ring from the camshaft timing oil control solenoid assembly.

      Note

      
      

      • If the O-ring comes off in the timing chain cover assembly, make sure to remove it.

      • Do not drop the O-ring into the timing chain cover assembly.

10. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 1)

    
    

    1. 

       Disconnect the camshaft timing oil control solenoid assembly connector.

    2. Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.

       Note

       If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

    3. Remove the O-ring from the camshaft timing oil control solenoid assembly.

       Note

       
       

       • If the O-ring comes off in the timing chain cover assembly, make sure to remove it.

       • Do not drop the O-ring into the timing chain cover assembly.

11. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 1)

    
    

    1. 

       Disconnect the camshaft timing oil control solenoid assembly connector.

    2. Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.

       Note

       If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

    3. Remove the O-ring from the camshaft timing oil control solenoid assembly.

       Note

       
       

       • If the O-ring comes off in the timing chain cover assembly, make sure to remove it.

       • Do not drop the O-ring into the timing chain cover assembly.