ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   Tech Tips

   Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

   Click here

   
   

   1. Install a new gasket to the engine coolant temperature sensor.

   2. Using a 19 mm union nut wrench, install the engine coolant temperature sensor to the cylinder head sub-assembly.

      Torque:

      19.6 N*m  { 200 kgf*cm, 14 ft.*lbf }

      Note

      
      

      • If the engine coolant temperature sensor has been struck or dropped, replace it.

      • Use the torque value compensation formula to calculate the torque value for use when a torque wrench is combined with a tool such as a union nut wrench.

        Click here

   3. Connect the engine coolant temperature sensor connector.

2. ADD ENGINE COOLANT

   Click here

3. INSPECT FOR COOLANT LEAK

   Click here

4. INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here

5. PERFORM INITIALIZATION

   
   

   1. Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

      Click here