ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. DRAIN ENGINE COOLANT

    Click here

  2. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. A0029X9

      Disconnect the engine coolant temperature sensor connector.

    2. Using a 19 mm union nut wrench, remove the engine coolant temperature sensor from the cylinder head sub-assembly.

      Note

      If the engine coolant temperature sensor has been struck or dropped, replace it.

    3. Remove the gasket from the engine coolant temperature sensor.