IGNITION COIL AND SPARK PLUG INSTALLATION

PROCEDURE

1. INSTALL SPARK PLUG

   Tech Tips

   Perform "Inspection After Repair" after replacing a spark plug.

   Click here

   
   

   1. Install the 6 spark plugs to the cylinder head sub-assembly.

      Torque:

      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

      Note

      If a spark plug has been struck or dropped, replace it.

      Tech Tips

      Install the same parts to their original positions.

2. INSTALL IGNITION COIL ASSEMBLY

   Tech Tips

   Perform "Inspection After Repair" after replacing an ignition coil assembly.

   Click here

   
   

   1. Install the 6 ignition coil assemblies to the cylinder head cover sub-assembly with the 6 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      If an ignition coil assembly has been struck or dropped, replace it.

      Tech Tips

      Install the same parts to their original positions.

   2. Connect the 6 ignition coil assembly connectors.

   3. Engage the 2 wire harness clamps.

3. INSTALL INTAKE AIR SURGE TANK ASSEMBLY

   Click here

4. PERFORM INITIALIZATION

   
   

   1. Perform "Inspection After Repair" after replacing a spark plug or ignition coil assembly.

      Click here