CAMSHAFT OIL CONTROL VALVE REMOVAL

PROCEDURE


  1. REMOVE INTAKE AIR SURGE TANK ASSEMBLY

    Click here

  2. SEPARATE WIRE HARNESS


    1. for Bank 1:


      1. A0028Y4

        Disengage the wire harness clamp to separate the wire harness.

    2. for Bank 2:


      1. A00284I

        Disengage the 2 wire harness clamps to separate the wire harness.

  3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 1)


    1. A0029K7

      Disconnect the camshaft timing oil control valve assembly connector.

    2. Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

      Note


      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

      • If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

    3. A0029YG

      Remove the O-ring from the camshaft timing oil control valve assembly.

  4. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 1)


    1. A002BZD

      Disconnect the camshaft timing oil control valve assembly connector.

    2. Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

      Note


      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

      • If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

    3. A002BLH

      Remove the O-ring from the camshaft timing oil control valve assembly.

  5. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 2)


    1. A0026U0

      Disconnect the camshaft timing oil control valve assembly connector.

    2. Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly LH.

      Note


      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly LH).

      • If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

    3. A002BLH

      Remove the O-ring from the camshaft timing oil control valve assembly.

  6. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 2)


    1. A0029N5

      Remove the bolt and wire harness clamp bracket from the cylinder head cover sub-assembly LH.

    2. Disconnect the camshaft timing oil control valve assembly connector.

    3. Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly LH.

      Note


      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly LH).

      • If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

    4. A0029LA

      Remove the O-ring from the camshaft timing oil control valve assembly.