ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. DRAIN ENGINE COOLANT

    Click here

  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  3. REMOVE AIR CLEANER ASSEMBLY

    Click here

  4. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. A002B87

      Disengage the heater hose from the heater bracket.

    2. Remove the bolt and separate the heater bracket from the cylinder head sub-assembly.

    3. A00295W

      Disconnect the engine coolant temperature sensor connector.

    4. Using a 19 mm union nut wrench, remove the engine coolant temperature sensor from the cylinder head sub-assembly.

      Note

      If the engine coolant temperature sensor has been struck or dropped, replace it.

    5. Remove the gasket from the engine coolant temperature sensor.