EXHAUST PIPE REMOVAL

PROCEDURE


  1. REMOVE FRONT FLOOR COVER LH

    Click here

  2. REMOVE TAIL EXHAUST PIPE ASSEMBLY


    1. A002A5T

      Remove the 2 bolts and tail exhaust pipe assembly from the center exhaust pipe assembly (TWC: Rear Catalyst).

    2. A0029MO

      Disconnect the tail exhaust pipe assembly from the 4 exhaust pipe supports.

    3. Remove the gasket from the center exhaust pipe assembly (TWC: Rear Catalyst).

  3. REMOVE CENTER EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)


    1. A002BM0

      Remove the 2 bolts, 2 compression springs and center exhaust pipe assembly (TWC: Rear Catalyst) from the front No. 3 exhaust pipe sub-assembly.

    2. Disconnect the center exhaust pipe assembly (TWC: Rear Catalyst) from the exhaust pipe support.

    3. Remove the gasket from the front No. 3 exhaust pipe sub-assembly.

  4. REMOVE HEATED OXYGEN SENSOR (for Bank 1)

    Click here

  5. REMOVE HEATED OXYGEN SENSOR (for Bank 2)

    Click here

  6. REMOVE FRONT NO. 3 EXHAUST PIPE SUB-ASSEMBLY


    1. A002AAA

      Remove the 2 bolts, 2 nuts and front No. 3 exhaust pipe sub-assembly.

    2. Remove the 2 gaskets from the front No. 3 exhaust pipe sub-assembly.

  7. REMOVE NO. 1 EXHAUST PIPE SUPPORT BRACKET (for Lower Side)


    1. A00293B

      Remove the 2 bolts and No. 1 exhaust pipe support bracket.

  8. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A002749

      Remove the 2 nuts and front exhaust pipe assembly from the exhaust manifold sub-assembly LH (TWC: Front Catalyst).

    2. Remove the gasket from the front exhaust pipe assembly.