VACUUM SWITCHING VALVE(for ACIS) REMOVAL

PROCEDURE


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  2. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY

    Click here

  3. REMOVE VACUUM SWITCHING VALVE ASSEMBLY (for ACIS)


    1. A00280A

      Disconnect the union to vacuum tube hose from the vacuum hose clamp.

    2. Disengage the wire harness clamp.

    3. Disconnect the 2 vacuum hoses.

    4. Disconnect the vacuum switching valve assembly (for ACIS) connector.

    5. Remove the bolt and vacuum switching valve assembly (for ACIS) from the intake manifold.

    6. A01QWDI

      Remove the bolt and vacuum hose clamp.