INTAKE AIR CONTROL VALVE ACTUATOR(for TCV) REMOVAL

PROCEDURE


  1. REMOVE INTAKE MANIFOLD

    Click here

  2. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR (for TCV)


    1. A018L8H

      Remove the 2 bolts, intake air control valve actuator (for TCV) and gasket from the intake manifold.

      Note


      • A018HKJ

        Make sure that foreign matter, such as water, oil, sand or iron particles, does not enter the gear chamber or intake air control valve actuator (for TCV) at the locations marked by the circles in the illustration.

      • A018MDE

        Do not loosen or remove the bolt and 2 nuts shown in the illustration.