CANISTER REMOVAL

PROCEDURE


  1. REMOVE TAIL EXHAUST PIPE ASSEMBLY

    Click here

  2. REMOVE CHARCOAL CANISTER PROTECTOR

    A002BT1

    1. Remove the 3 bolts and charcoal canister protector.

  3. REMOVE CANISTER (CHARCOAL CANISTER ASSEMBLY)


    1. A002CBUC03
      *a Retainer
      *b Claw
      B003ZIE Pull
      B003Z8F Pull out
      B003ZMU Pull off

      Disengage the 2 claws of the retainer. Pull out the retainer and disconnect the fuel tank vent hose sub-assembly from the canister (charcoal canister assembly).

      Note


      • Be sure to disconnect the fuel tank vent hose sub-assembly by hand.

      • Do not scratch or allow any foreign matter to get on the parts when disconnecting them as the fuel tube connector has O-rings that seal the pipe.

      • Do not bend, twist, pinch or kink the fuel tank vent hose sub-assembly.

      • Protect the disconnected parts by covering them with plastic bags after disconnecting the fuel tank vent hose sub-assembly.

    2. Close the fuel tank vent hose sub-assembly using a hose plug or similar part.

    3. A002B8AC01
      *a Charcoal Canister Hose
      *b Outlet Charcoal Canister Tube Sub-assembly

      Slide the clip and disconnect the charcoal canister hose from the fuel tube.

    4. Slide the clip and disconnect the outlet charcoal canister tube sub-assembly from the canister (charcoal canister assembly).

    5. A002A8UC01
      *a Clip
      *b Guide

      Remove the 3 nuts and disengage the clip to remove the canister (charcoal canister assembly) from the vehicle body and guide.