CANISTER REMOVAL

PROCEDURE


  1. REMOVE TAIL EXHAUST PIPE ASSEMBLY

    Click here

  2. REMOVE CHARCOAL CANISTER PROTECTOR

    A002BT1

    1. Remove the 3 bolts and charcoal canister protector.

  3. REMOVE CANISTER (CHARCOAL CANISTER ASSEMBLY)


    1. A002BOFC01
      *a Retainer
      B003ZIE Pull Out
      B003Z8F Pull Off

      Disengage the 2 claws, pull out the retainer and pull off the vent line hose.

      Note


      • Remove any dirt or foreign matter on the vent line hose before performing this work.

      • Do not allow any scratches or foreign matter to get on the parts when disconnecting them as the vent line hose has an O-ring that seals the pipe.

      • Only disconnect the vent line hose by hand.

      • Do not forcibly bend, twist or turn the vent line hose.

    2. A002B8AC01
      *a Purge Line Hose
      *b Air Line Hose

      Slide the clip and disconnect the purge line hose from the fuel tube.

    3. Slide the clip and disconnect the air line hose from the canister (charcoal canister assembly).

    4. A002AZ8

      Remove the 3 nuts, clip and canister (charcoal canister assembly).