FUEL MAIN VALVE REMOVAL

CAUTION / NOTICE / HINT

Note


  • Do not disconnect the tube shown in the illustration when disassembling the fuel suction tube with pump and gauge assembly. Doing so will cause reassembly of the fuel suction tube with pump and gauge assembly to be impossible as the tube is pressed into the fuel suction plate sub-assembly.

  • When replacing the fuel filter, replace it together with the fuel suction plate sub-assembly.

B003YXVC01
*a Tube

PROCEDURE


  1. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

    Click here

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY

    Click here

  3. REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY

    Click here

  4. REMOVE FUEL PUMP FILTER

    Click here

  5. REMOVE FUEL MAIN VALVE ASSEMBLY


    1. A0026YW

      Remove the fuel main valve assembly (for Low Pressure).


      1. Remove the clip from the fuel filter.

      2. B003YWJC01
        *a Protective Tape

        Using a screwdriver with its tip wrapped with protective tape, remove the fuel main valve assembly from the fuel filter.

        Note


        • Pull out the fuel main valve assembly carefully because the O-rings are firmly installed between the fuel main valve assembly and fuel filter.

        • Do not damage the fuel filter.

      3. B00406PC10
        *1 O-ring

        Remove the 2 O-rings from the fuel main valve assembly.

    2. A002AQN

      Remove the fuel main valve assembly (for High Pressure).


      1. Remove the clip from the fuel filter.

      2. B003ZSKC01
        *a Protective Tape

        Using a screwdriver with its tip wrapped with protective tape, remove the fuel main valve assembly from the fuel filter.

        Note


        • Pull out the fuel main valve assembly carefully because the O-rings are firmly installed between the fuel main valve assembly and fuel filter.

        • Do not damage the fuel filter.

      3. B00406PC10
        *1 O-ring

        Remove the 2 O-rings from the fuel main valve assembly.