THERMOSTAT INSTALLATION

PROCEDURE

1. INSTALL THERMOSTAT

   
   

   1. Install a new gasket to the thermostat.

   2. 

      *a	Jiggle Valve
      *b	10°

      Install the thermostat to the water inlet housing.

      Tech Tips

      The jiggle valve may be set within 10° on either side of the prescribed position.

2. INSTALL WATER INLET

   
   

   1. Install the water inlet with the 2 nuts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

3. CONNECT NO. 2 RADIATOR HOSE

   Click here

4. INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY

   Click here

5. INSTALL V-RIBBED BELT

   Click here

6. ADD ENGINE COOLANT

   Click here

7. INSPECT FOR COOLANT LEAK

   Click here

8. INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here