BLACK OUT TAPE(for Rear Door) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REPAIR INSTRUCTION

    Click here

  2. INSTALL INNER UPPER BLACK OUT TAPE


    1. Refer to the illustration to position a new inner upper black out tape.

      A0020KTC02
      *A LH Side *B RH Side
      *a Edge of Curved Surface *b Straight
      *c Triangle - -
      Standard Measurement
      Dimension Measurement
      A 1.5 mm (0.0591 in.)
      B 1.0 mm (0.0394 in.)

    2. Remove the release paper and apply the inner upper black out tape.

  3. INSTALL FRONT INNER BLACK OUT TAPE


    1. Refer to the illustration to position a new front inner black out tape.

      A0022ECC02
      *A LH Side *B RH Side
      *a Edge of Curved Surface *b Straight
      *c Triangle - -
      Standard Measurement
      Dimension Measurement
      A 1.5 mm (0.0591 in.)
      B 1.0 mm (0.0394 in.)

    2. Remove the release paper and apply the front inner black out tape.

  4. INSTALL REAR DOOR FRAME GARNISH

    Click here

  5. INSTALL REAR DOOR WEATHERSTRIP

    Click here

  6. INSTALL REAR DOOR CHECK ASSEMBLY

    Click here

  7. INSTALL REAR SPEAKER ASSEMBLY

    Click here

  8. INSTALL REAR DOOR BELT MOULDING ASSEMBLY

    Click here