ROCKER PANEL MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL ROCKER PANEL MOULDING ASSEMBLY


    1. Install 11 new clips to the rocker panel moulding assembly.

    2. Engage the 11 clips.

    3. Install the 2 screws.

    4. Install the 6 clips.

    5. A01MTU9

      Engage the 2 claws to install the rocker panel moulding cover.

      Tech Tips

      Use the same procedure for the other rocker panel moulding cover.

    6. Install the screw.

    7. Install the clip.

    8. Install the rocker panel moulding assembly with the screw.

  2. INSTALL BODY SIDE NAME PLATE

    Click here

  3. INSTALL NO. 2 REAR FLOOR HOUSING SHIELD

    Click here