ROCKER PANEL MOULDING REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL NO. 1 SIDE MUDGUARD PROTECTOR


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. for Rear Side:


      1. A011M7G

        Install a new No. 1 side mudguard protector to the rocker panel moulding body as shown in the illustration.

        Tech Tips

        Press the No. 1 side mudguard protector firmly to install it.

    3. for Front Side:


      1. A011OVR

        Install a new No. 1 side mudguard protector to the rocker panel moulding body as shown in the illustration.

        Tech Tips

        Press the No. 1 side mudguard protector firmly to install it.

  2. INSTALL NO. 2 SIDE MUDGUARD PROTECTOR


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 2 side mudguard protector.


      1. Remove the release paper from the face of the No. 2 side mudguard protector.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      2. A011PUS

        Install the No. 2 side mudguard protector as shown in the illustration.

  3. INSTALL NO. 1 ROCKER PANEL MOULDING PROTECTOR


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 1 rocker panel moulding protector.


      1. Remove the release paper from the face of the No. 1 rocker panel moulding protector.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      2. Install the 2 No. 1 rocker panel moulding protectors as shown in the illustration.

        A011M6OC02
        *a Marking *b Dimension
        Reference Measurement
        Dimension Measurement
        A 10.0 mm

  4. INSTALL NO. 3 ROCKER PANEL MOULDING PROTECTOR


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 3 rocker panel moulding protector.


      1. Remove the release paper from the face of the No. 3 rocker panel moulding protector.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      2. A011PY6

        Install the No. 3 rocker panel moulding protector as shown in the illustration.

  5. INSTALL NO. 2 ROCKER PANEL MOULDING PROTECTOR


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 2 rocker panel moulding protector.


      1. Remove the release paper from the face of the No. 2 rocker panel moulding protector.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      2. Install the No. 2 rocker panel moulding protector as shown in the illustration.

        A011OS7