ROCKER PANEL MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE NO. 2 REAR FLOOR HOUSING SHIELD

    Click here

  2. REMOVE BODY SIDE NAME PLATE

    Click here

  3. REMOVE ROCKER PANEL MOULDING ASSEMBLY


    1. Apply protective tape around the rocker panel moulding assembly and door.

      A01CZ77C02
      B003YLR Protective Tape - -
    2. A01D0EL

      Remove the screw and clip.

    3. A01CZ9D

      Remove the screw.

    4. A01CZG7C02
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws to remove the rocker panel moulding cover.

      Tech Tips

      Use the same procedure for the other rocker panel moulding cover.

    5. A01CZSN

      Remove the 6 clips.

    6. Remove the 2 screws.

    7. A01CZK3

      Disengage the 11 clips and remove the rocker panel moulding assembly.

    8. Remove the 11 clips from the rocker panel moulding assembly.