NAME PLATE INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate or Emblem 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, name plates or emblem excessively.

PROCEDURE


  1. INSTALL FRONT FENDER NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new front fender name plate.


      1. Using a heat light, heat the vehicle body and front fender name plate.

      2. Remove the release paper from the front fender name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Engage the 2 pins and install the front fender name plate as shown in the illustration.

        for LH Side:

        A01D0S6C01
        *a Profile of Front Fender Panel *b Location Pin

        for RH Side:

        A01D05VC01
        *a Profile of Front Fender Panel *b Location Pin

  2. INSTALL BODY SIDE NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new body side name plate.


      1. Using a heat light, heat the vehicle body and body side name plate.

      2. Remove the release paper from the body side name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the body side name plate as shown in the illustration.

        for LH Side:

        A01D0F8C01
        *a Profile of Rocker Panel Moulding Assembly - -
        Reference Measurement
        Area Measurement
        A 29.8 mm (1.17 in.)
        B 64.6 mm (2.54 in.)
        C 60.5 mm (2.38 in.)

        for RH Side:

        A01D03LC01
        *a Profile of Rocker Panel Moulding Assembly - -
        Reference Measurement
        Area Measurement
        A 60.5 mm (2.38 in.)
        B 64.6 mm (2.54 in.)
        C 29.8 mm (1.17 in.)

  3. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 3 luggage compartment door name plate.


      1. Using a heat light, heat the vehicle body and No. 3 luggage compartment door name plate.

      2. Remove the release paper from the No. 3 luggage compartment door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 3 luggage compartment door name plate as shown in the illustration.

        A01MST1C01
        *a Profile of Luggage Compartment Door Panel - -
        Reference Measurement
        Area Measurement
        A 61.3 mm (2.41 in.)
        B 54.7 mm (2.15 in.)
        C 121.8 mm (4.80 in.)

  4. INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 1 luggage compartment door name plate.


      1. Using a heat light, heat the vehicle body and No. 1 luggage compartment door name plate.

      2. Remove the release paper from the No. 1 luggage compartment door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 1 luggage compartment door name plate as shown in the illustration.

        A01CZUIC01
        *a Profile of Luggage Compartment Door Panel - -
        Reference Measurement
        Area Measurement
        A 129.0 mm (5.08 in.)
        B 54.6 mm (2.15 in.)
        C 61.4 mm (2.42 in.)

  5. INSTALL SYMBOL EMBLEM


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new symbol emblem.


      1. Using a heat light, heat the vehicle body and symbol emblem.

      2. Remove the release paper from the symbol emblem.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Engage the 2 pins and install the symbol emblem as shown in the illustration.

        A01D00IC01
        *a Profile of Luggage Compartment Door Panel *b Location Pin