FRONT BUMPER(for Sport Package) INSTALLATION

PROCEDURE


  1. INSTALL FRONT BUMPER ASSEMBLY


    1. A01MT5Z

      w/ Headlight Cleaner System:


      1. Remove the hose plage No. 2 and connect the washer hose to the windshield washer motor and pump assembly.

      2. Engage the clip.

    2. Move the front bumper assembly into position.

    3. Connect each connector.

      Note

      Do not apply excessive force when pulling back the front bumper assembly.

    4. A01MTZBN01

      Engage the 7 guides and claw (a) in the direction indicated by the arrow (1) in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. Disengage the 2 claws (b) in the direction indicated by the arrow (2) in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. Install the 2 clips.

    7. Install the 3 bolts.

    8. Install the 8 screws.

    9. Install the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    10. A01MSRMC01
      *1 Pin Hold Clip
      *a Correct
      *b Incorrect

      Install the pin hold clip as shown in the illustration.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    11. Install the front bumper assembly with the clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. INSTALL RADIATOR SUPPORT CUSHION

    Click here

  3. INSTALL COOL AIR INTAKE DUCT SEAL

    Click here

  4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  6. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

  7. ADJUST FOG LIGHT ASSEMBLY (w/ Fog Light)

    Click here

  8. ADD WINDSHIELD WASHER FLUID (w/ Headlight Cleaner System)

    Click here