PROCEDURE
REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)
REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)
Tech Tips
Use the same procedure as for the LH side.
REMOVE HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)
Disengage the 9 clamps and remove the headlight cleaner hose.
REMOVE NO. 4 ENGINE ROOM WIRE (w/ LEXUS Parking Assist-sensor System)
Disengage the 16 clamps to remove the No. 4 engine room wire.
REMOVE CONNECTOR COVER (w/o LEXUS Parking Assist-sensor System)
Disengage the clamp to remove the connector cover.
REMOVE AIR INTAKE DUCT LH
| *a | 90° |
Using a screwdriver, turn the pin 90 degrees and remove the 2 pin hold clips.
Remove the screw.
Remove the clip.
Disengage the 2 claws and guide to remove the air intake duct LH.
REMOVE AIR INTAKE DUCT RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE NO. 2 COOL AIR INTAKE DUCT
Remove the 4 screws and No. 2 cool air intake duct.
REMOVE NO. 1 COOL AIR INTAKE DUCT
Tech Tips
Use the same procedure as for the No. 2 cool air intake duct.
REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Tech Tips
Use the same procedure as for the LH side.
REMOVE FOG LIGHT MOUNTING BRACKET LH (w/o Fog Light)
Remove the 3 screws.
Disengage the 2 guides to remove the fog light mounting bracket LH.
REMOVE FOG LIGHT MOUNTING BRACKET RH (w/o Fog Light)
Tech Tips
Use the same procedure as for the LH side.
REMOVE FOG LIGHT MOUNTING BRACKET LH (w/ Fog Light)
Remove the 3 screws.
Disengage the 2 guides to remove the fog light mounting bracket LH.
REMOVE FOG LIGHT MOUNTING BRACKET RH (w/ Fog Light)
Tech Tips
Use the same procedure as for the LH side.
REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)
Disengage the 4 claws and guide, to remove the front bumper hole cover LH.
REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)
Tech Tips
Use the same procedure as for the LH side.
REMOVE FOG LIGHT COVER LH (w/ Fog Light)
Disengage the 4 claws and guide, to remove the fog light cover LH.
REMOVE FOG LIGHT COVER RH (w/ Fog Light)
Tech Tips
Use the same procedure as for the LH side.
REMOVE RADIATOR GRILLE CENTER MOULDING LH (w/o LEXUS Parking Assist-sensor System)
Disengage the 2 claws and remove the radiator grille center moulding LH.
REMOVE RADIATOR GRILLE CENTER MOULDING RH (w/o LEXUS Parking Assist-sensor System)
Tech Tips
Use the same procedure as for the LH side.
REMOVE NO. 1 ULTRASONIC SENSOR (w/ LEXUS Parking Assist-sensor System)
REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ LEXUS Parking Assist-sensor System)
REMOVE NO. 2 ULTRASONIC SENSOR (w/ LEXUS Parking Assist-sensor System)
REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ LEXUS Parking Assist-sensor System)
REMOVE FRONT BUMPER EXTENTION MOUNTING BRACKET
for Type A:
Remove the 2 screws.
Disengage the 4 claws to remove the front bumper extension mounting bracket.
for Type B:
Remove the 2 screws.
Disengage the 4 claws to remove the front bumper extension mounting bracket.
REMOVE LOWER FRONT BUMPER COVER
| *a | Hook |
Disengage the 2 claws and guide.
Disengage the hook to remove the lower front bumper cover.
REMOVE CLEARANCE LIGHT ASSEMBLY LH
REMOVE CLEARANCE LIGHT ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE NO. 2 FRONT BUMPER RETAINER BRACKET
REMOVE NO. 1 FRONT BUMPER RETAINER BRACKET
Tech Tips
Use the same procedure as for the No. 2 front bumper retainer bracket.
REMOVE NO. 1 FRONT BUMPER BRACKET LH
REMOVE NO. 1 FRONT BUMPER BRACKET RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE FRONT BUMPER BRACKET LH
REMOVE FRONT BUMPER BRACKET RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE RADIATOR GRILLE PROTECTOR
REMOVE RADIATOR GRILLE BRACKET
REMOVE SYMBOL EMBLEM (w/o Dynamic Radar Cruise Control System)
REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (w/ Dynamic Radar Cruise Control System)
REMOVE RADIATOR GRILLE ASSEMBLY
Remove the 4 screws.
Disengage the 18 claws and 2 guides.
Disengage the 7 claws and 2 guides, and remove the radiator grille assembly from the front bumper cover.
REMOVE INSIDE RADIATOR GRILLE
Remove the 2 screws.
Remove the 13 claws and 3 guides, and remove the inside radiator grille.
REMOVE RADIATOR GRILLE MOULDING
Disengage the 4 claws to remove the radiator grille moulding.
REMOVE FRONT BUMPER ENERGY ABSORBER
REMOVE POP-UP HOOD CHAMBER WITH SENSOR ASSEMBLY
REMOVE FRONT BUMPER REINFORCEMENT
REMOVE FRONT BUMPER SIDE RETAINER LH
REMOVE FRONT BUMPER SIDE RETAINER RH
Tech Tips
Use the same procedure as for the LH side.