FRONT BUMPER(for Sport Package) COMPONENTS
ILLUSTRATION
| *1 | BATTERY SERVICE HOLE COVER LH | - | - |
ILLUSTRATION
| *1 | COOL AIR INTAKE DUCT SEAL | *2 | FRONT BUMPER ASSEMBLY |
| *3 | RADIATOR SUPPORT CUSHION | - | - |
ILLUSTRATION
| *A | w/ Headlight Cleaner System | *B | w/ Fog Light |
| *C | w/o Fog Light | - | - |
| *1 | AIR INTAKE DUCT LH | *2 | AIR INTAKE DUCT RH |
| *3 | FOG LIGHT ASSEMBLY LH | *4 | FOG LIGHT ASSEMBLY RH |
| *5 | FOG LIGHT COVER LH | *6 | FOG LIGHT COVER RH |
| *7 | FOG LIGHT MOUNTING BRACKET LH | *8 | FOG LIGHT MOUNTING BRACKET RH |
| *9 | FRONT BUMPER HOLE COVER LH | *10 | FRONT BUMPER HOLE COVER RH |
| *11 | HEADLIGHT CLEANER HOSE | *12 | HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH |
| *13 | HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH | *14 | NO. 3 HEADLIGHT CLEANER CLAMP |
| *15 | NO. 2 HEADLIGHT CLEANER CLAMP | - | - |
ILLUSTRATION
| *A | w/o LEXUS Parking Assist-sensor System | *B | w/ LEXUS Parking Assist-sensor System |
| *1 | CONNECTOR COVER | *2 | NO. 1 ULTRASONIC SENSOR |
| *3 | NO. 1 ULTRASONIC SENSOR RETAINER | *4 | NO. 2 ULTRASONIC SENSOR |
| *5 | NO. 2 ULTRASONIC SENSOR RETAINER | *6 | NO. 4 ENGINE ROOM WIRE |
| *7 | RADIATOR GRILLE CENTER MOULDING LH | *8 | RADIATOR GRILLE CENTER MOULDING RH |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *A | for Type A | *B | for Type B |
| *C | w/o Dynamic Radar Cruise Control System | *D | w/ Dynamic Radar Cruise Control System |
| *1 | CLEARANCE LIGHT ASSEMBLY LH | *2 | CLEARANCE LIGHT ASSEMBLY RH |
| *3 | FRONT BUMPER BRACKET LH | *4 | FRONT BUMPER BRACKET RH |
| *5 | FRONT BUMPER EXTENTION MOUNTING BRACKET | *6 | INSIDE RADIATOR GRILLE |
| *7 | LOWER FRONT BUMPER COVER | *8 | NO. 1 COOL AIR INTAKE DUCT |
| *9 | NO. 1 FRONT BUMPER BRACKET LH | *10 | NO. 1 FRONT BUMPER BRACKET RH |
| *11 | NO. 1 FRONT BUMPER RETAINER BRACKET | *12 | NO. 2 COOL AIR INTAKE DUCT |
| *13 | NO. 2 FRONT BUMPER RETAINER BRACKET | *14 | RADIATOR GRILLE (OR FRONT PANEL) EMBLEM |
| *15 | RADIATOR GRILLE ASSEMBLY | *16 | RADIATOR GRILLE BRACKET |
| *17 | RADIATOR GRILLE MOULDING | *18 | RADIATOR GRILLE PROTECTOR |
| *19 | SYMBOL EMBLEM | *20 | FRONT BUMPER EXTENTION |
| *21 | SPRING NUT | *22 | FRONT BUMPER COVER |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *1 | FRONT BUMPER ENERGY ABSORBER | *2 | FRONT BUMPER REINFORCEMENT |
| *3 | FRONT BUMPER SIDE RETAINER LH | *4 | FRONT BUMPER SIDE RETAINER RH |
| *5 | POP-UP HOOD CHAMBER WITH SENSOR ASSEMBLY | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |