REAR BUMPER DISASSEMBLY

PROCEDURE


  1. REMOVE REAR BUMPER PAD


    1. A011O1G

      Remove the rear bumper pad.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. REMOVE REAR BUMPER PIECE


    1. A011OXPC01
      *a Hook

      Disengage the 2 claws.

    2. Disengage the hook to remove the rear bumper piece.

  3. REMOVE REFLEX REFLECTOR ASSEMBLY LH


    1. A011OTD

      Remove the screw.

    2. Disengage claw and guide, and remove the reflex reflector assembly LH.

  4. REMOVE REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  5. REMOVE REAR LOWER BUMPER COVER


    1. Remove the 2 screws.

      A011Q46

    2. Remove the 5 clips.

      A011M9O

    3. Disengage the 10 claws and 2 guides, to remove the lower bumper cover.

      A011QB3

  6. REMOVE NO. 3 LUGGAGE ROOM WIRE (w/ LEXUS Parking Assist-sensor System)


    1. Disengage the 4 clamps.

      A0020II

    2. Disconnect the 4 connectors to remove the No. 3 luggage room wire.

  7. REMOVE ULTRASONIC SENSOR WITH CLIP (w/ LEXUS Parking Assist-sensor System)

    Click here

    Tech Tips

    Use the same procedure for all ultrasonic sensor with clips.

  8. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ LEXUS Parking Assist-sensor System)

    Click here

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensor retainers.

  9. REMOVE REAR LIGHT COVER (for LH Side)

    Click here

  10. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

    Click here

  11. REMOVE REAR LIGHT COVER (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  12. REMOVE REAR COMBINATION LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  13. REMOVE REAR BUMPER UPPER RETAINER LH

    Click here

  14. REMOVE REAR BUMPER UPPER RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  15. REMOVE NO. 2 REAR BUMPER SIDE SUPPORT LH


    1. B003Y3R

      Using a screwdriver, disengage the 3 clips as shown in the illustration.

    2. B003Y01

      Disengage the 4 claws and remove the No. 2 rear bumper side support LH.

  16. REMOVE NO. 2 REAR BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure as for the LH side.

  17. REMOVE NO. 1 REAR BUMPER SIDE SUPPORT LH


    1. B003Y13

      Remove the grommet.

    2. B003Y4R

      Remove the 2 screws.

    3. B003XVT

      Disengage the guide and claw to remove the No. 1 rear bumper side support LH.

  18. REMOVE NO. 1 REAR BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure as for the LH side.

  19. REMOVE REAR BUMPER ENERGY ABSORBER


    1. A011OQJ

      Disengage the 2 guides to remove the rear bumper energy absorber.

  20. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY

    A011OQS

    1. Remove the 8 bolts to rear bumper reinforcement sub-assembly.