REAR BUMPER REMOVAL

PROCEDURE


  1. REMOVE NO. 1 REAR BUMPER PLATE


    1. A011N60C02
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws to remove the No. 1 rear bumper plate.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. REMOVE REAR BUMPER ASSEMBLY


    1. A011NKVC02
      B003YLR Protective Tape

      Apply protective tape around the rear bumper assembly as shown in the illustration.

    2. A011OT5

      Remove the 2 bolts.

    3. A011P2Z

      Remove the 6 clips.

    4. A011NEK

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. Disengage the claw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A011NKA

      Disengage the 5 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. A011NK0

      Disengage the 4 claws and remove the rear bumper assembly as shown in the illustration.

    8. w/ LEXUS Parking Assist-sensor System:


      1. Disconnect the connector.