HEADLIGHT DIMMER SWITCH INSPECTION

PROCEDURE


  1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for Light Control Switch LH Side Type)


    1. A0021RZC51
      *A w/ Rear Fog Light
      *a

      Component without harness connected

      (Headlight Dimmer Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Light Control Switch
      Tester Connection Condition Specified Condition
      22 (T) - 19 (EL) Light control switch off 10 kΩ or higher
      23 (H) - 19 (EL) 10 kΩ or higher
      24 (A) - 19 (EL) 10 kΩ or higher
      22 (T) - 19 (EL) Light control switch in tail position Below 1 Ω
      22 (T) - 19 (EL) Light control switch in head position Below 1 Ω
      23 (H) - 19 (EL) Below 1 Ω
      24 (A) - 19 (EL) Light control switch in AUTO position Below 1 Ω
      Dimmer Switch
      Tester Connection Condition Specified Condition
      18 (HU) - 19 (EL) Dimmer switch in high position Below 1 Ω
      18 (HU) - 19 (EL) Dimmer switch in high flash position Below 1 Ω
      21 (HF) - 19 (EL) Below 1 Ω
      Turn Signal Switch
      Tester Connection Condition Specified Condition
      15 (TR) - 16 (E) Turn signal switch in neutral position 10 kΩ or higher
      14 (TL) - 16 (E) 10 kΩ or higher
      17 (CR) - 16 (E) 10 kΩ or higher
      15 (TR) - 16 (E) Turn signal switch in right turn position Below 1 Ω
      17 (CR) - 16 (E) Turn signal switch in full right turn position Below 1 Ω
      14 (TL) - 16 (E) Turn signal switch in left turn position Below 1 Ω
      17 (CR) - 16 (E) Turn signal switch in full left turn position Below 1 Ω
      Fog Light Switch (w/ Rear Fog Light)
      Tester Connection Condition Specified Condition
      9 (B) - 10 (LFG) Fog light switch off 10 kΩ or higher
      9 (B) - 10 (LFG) Fog light switch in rear position Below 1 Ω

      If the result is not as specified, replace the headlight dimmer switch assembly.

  2. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for Light Control Switch RH Side Type)


    1. A0021RZC50
      *A w/ Rear Fog Light
      *a

      Component without harness connected

      (Headlight Dimmer Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Light Control Switch
      Tester Connection Condition Specified Condition
      15 (T) - 18 (EL) Light control switch off 10 kΩ or higher
      14 (H) - 18 (EL) 10 kΩ or higher
      13 (A) - 18 (EL) 10 kΩ or higher
      15 (T) - 18 (EL) Light control switch in tail position Below 1 Ω
      15 (T) - 18 (EL) Light control switch in head position Below 1 Ω
      14 (H) - 18 (EL) Below 1 Ω
      13 (A) - 18 (EL) Light control switch in AUTO position Below 1 Ω
      Dimmer Switch
      Tester Connection Condition Specified Condition
      19 (HU) - 18 (EL) Dimmer switch in high position Below 1 Ω
      19 (HU) - 18 (EL) Dimmer switch in high flash position Below 1 Ω
      16 (HF) - 18 (EL) Below 1 Ω
      Turn Signal Switch
      Tester Connection Condition Specified Condition
      23 (TR) - 21 (E) Turn signal switch in neutral position 10 kΩ or higher
      22 (TL) - 21 (E) 10 kΩ or higher
      20 (CR) - 21 (E) 10 kΩ or higher
      23 (TR) - 21 (E) Turn signal switch in right turn position Below 1 Ω
      20 (CR) - 21 (E) Turn signal switch in full right turn position Below 1 Ω
      22 (TL) - 21 (E) Turn signal switch in left turn position Below 1 Ω
      20 (CR) - 21 (E) Turn signal switch in full left turn position Below 1 Ω
      Fog Light Switch (w/ Rear Fog Light)
      Tester Connection Condition Specified Condition
      4 (B) - 3 (LFG) Fog light switch off 10 kΩ or higher
      4 (B) - 3 (LFG) Fog light switch in rear position Below 1 Ω

      If the result is not as specified, replace the headlight dimmer switch assembly.