SIDE TURN SIGNAL LIGHT ASSEMBLY INSPECTION

PROCEDURE

1. Click here

   INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

   
   
   1. 

      *a	Component without harness connected (Side Turn Signal Light Assembly LH)

      Apply auxiliary battery voltage to the side turn signal light LH and check that the light comes on.

      OK
      Condition Specified Condition Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Side turn signal light LH comes on

      If the result is not as specified, replace the side turn signal light assembly LH.

2. Click here

   INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

   
   
   1. 

      *a	Component without harness connected (Side Turn Signal Light Assembly RH)

      Apply auxiliary battery voltage to the side turn signal light RH and check that the light comes on.

      OK
      Condition Specified Condition Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Side turn signal light RH comes on

      If the result is not as specified, replace the side turn signal light assembly RH.