FOG LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL FOG LIGHT ASSEMBLY (for Standard)


    1. Engage the 2 guides to temporarily install the fog light assembly.

    2. Install the fog light assembly with the screw.

  2. INSTALL FOG LIGHT ASSEMBLY (for Sport Package)


    1. Install the fog light assembly with the 3 bolts.

  3. INSTALL AIR INTAKE DUCT (for Standard)


    1. Engage the guide and 2 claws.

    2. Install the clip.

    3. Install the 2 screws.

    4. A01D0N5C02
      *a Correct
      *b Incorrect

      Install the air intake duct with the 2 pin hold clips as shown in the illustration.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

    5. Engage each clamp.

  4. INSTALL FRONT BUMPER ASSEMBLY

    for Standard Click here

    for Sport Package Click here