HEADLIGHT ASSEMBLY(for HID Headlight) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY


    1. Install the headlight assembly with the 2 bolts and screw.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    2. Connect the 2 connectors.

  2. INSTALL UPPER FRONT FENDER PROTECTOR


    1. Engage the 3 clips to install the upper front fender protector.

  3. INSTALL FRONT BUMPER ASSEMBLY

    for Standard: Click here

    for Sport Package: Click here

  4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

  6. ADJUST HEADLIGHT AIMING

    Click here

  7. ADJUST FOG LIGHT AIMING

    Click here