HEADLIGHT ASSEMBLY(for HID Headlight) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. PRECAUTION

    Click here

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work.

    Click here

  2. REMOVE BATTERY SERVICE HOLE COVER LH

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. REMOVE FRONT BUMPER ASSEMBLY

    for Standard: Click here

    for Sport Package: Click here

  5. REMOVE UPPER FRONT FENDER PROTECTOR


    1. A01MU10

      Disengage the 3 clips to remove the upper front fender protector.

  6. REMOVE HEADLIGHT ASSEMBLY

    CAUTION:

    The headlight light control ECU sub-assembly may be hot when the light control switch is in the HEAD position or right after it is turned off. Check that the headlight light control ECU sub-assembly is not hot before starting work.


    1. A01MROTC02
      B003YHT Bolt
      B003XOB Screw

      Disconnect the 2 connectors.

    2. Remove the 2 bolts, screw and headlight assembly.