WASHER NOZZLE ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. Operate the washer nozzle sub-assembly and check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.
      A011MYRC01
      *a Vehicle center line - -
      B003YLR Measurement - -
      Standard Clearance
      Area Measurement Area Measurement
      A 292 mm (11.5 in.) B 75 mm (2.95 in.)
      C 231 mm (9.09 in.) - -

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.