Click here

WASHER MOTOR INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

    Tip:

    This check should be performed with the windshield washer motor and pump assembly installed on the washer jar.


    1. Fill the washer jar with washer fluid.

    2. A011OA5C12
      *a

      Component without harness connected

      (Windshield Washer Motor and Pump Assembly)

      Connect a auxiliary battery positive (+) lead to terminal 1 of the windshield washer motor and pump assembly, and a auxiliary battery negative (-) lead to terminal 2.

    3. Check that washer fluid flows from the washer jar.

      OK
      Washer fluid flows from the washer jar.

      If the result is not as specified, replace the windshield washer motor and pump assembly.