WASHER MOTOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL LH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH


    1. A0020UY

      Remove the 3 screws and front wheel opening extension pad LH.

  3. REMOVE FRONT FENDER LINER LH


    1. A002306C01
      *a 90°

      Using a screwdriver, turn the pin 90 degrees clockwise to remove the pin hold clip.

    2. A0022E2

      Remove the 3 screws.

    3. A0020TH

      Remove the 8 screws.

    4. A0022O7

      Remove the clip.

    5. A0021Z0

      Remove the 7 clips and front fender liner LH.

  4. DRAIN WINDSHIELD WASHER FLUID


    1. A00208G

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the windshield washer fluid.

      Tech Tips

      Use a container to collect the windshield washer fluid.

  5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A0020EE

      Disconnect the connector.

    2. Remove the windshield washer motor and pump assembly as shown in the illustration.