WIPER SWITCH INSPECTION

PROCEDURE


  1. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY


    1. B003YA6C02
      *A for LHD, RHD (for Wiper Switch RH Side Type)
      *B for RHD (for Wiper Switch LH Side Type)
      *a

      Component without harness connected

      (Windshield Wiper Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for LHD, RHD (for Wiper Switch RH Side Type)
      Tester Connection Condition Specified Condition
      K25-7 (WF) - K25-4 (EW) Front washer switch on Below 1 Ω
      Front washer switch off 10 kΩ or higher
      for RHD (for Wiper Switch LH Side Type)
      Tester Connection Condition Specified Condition
      K25-4 (WF) - K25-7 (EW) Front washer switch on Below 1 Ω
      Front washer switch off 10 kΩ or higher

      If the result is not as specified, replace the windshield wiper switch assembly.