LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (EXT)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Tech Tips

    The following items can be customized.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Body Electrical / Main Body / Utility / Customize / Light Control or Illuminated Entry.

      5. Select the setting by referring to the table below.


        Light Control
        Tester Display Description Default Setting ECU
        Disp Ex ON Sen Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A NORMAL 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main Body ECU (Multiplex Network Body ECU)
        Disp Ex OFF Sen Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B NORMAL 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main Body ECU (Multiplex Network Body ECU)
        Sensitivity Adjusts the sensitivity of the automatic light control system.*C Normal 000:Normal,001:Dark2,010:Dark1,011:Light1,100:Light2 Main Body ECU (Multiplex Network Body ECU)
        DRL Function ON/OFF of the DRL function*1 ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)
        Follow Me Home Lighting Time Sets the headlight lighting time after the power switch is turned off.*2 30 s 00:30 s,01:60 s,10:90 s,11:120 s Main Body ECU (Multiplex Network Body ECU)
        Light up Clearance Lights at Door Unlock Function Turns on the clearance lights and the taillights for 15 seconds when the doors are unlocked by the smart key or the wireless key. ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)

        • *1: w/o Mirror Heater

        • *2: for European Models

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


        • *A

          A01D069E01

        • *B

          A01D069E02

        • *C

          A01D069E03

        Illuminated Entry
        Tester Display Description Default Setting ECU
        Mirr-Foot-Lgt Approached Lights up the door mirror foot lights when a key enters any actuation area around the doors. ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)
        Mirr-Foot-Lgt Unlocked Lights up door mirror foot lights when doors are unlocked using a mechanical key or door control transmitter. ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)
        Mirror Foot Light Time Changes the lighting time of the door mirror foot lights. 15 s 00:15 s,01:7.5 s,10:30 s,11:0 s Main Body ECU (Multiplex Network Body ECU)
        Exterior Light Control Changes the door mirror foot light control. ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)

    2. Customizing with the Multi-display


      1. Turn the power switch on (IG).

      2. Enter the following menus: SETUP / Vehicle / Vehicle settings.

      3. Select the setting by referring to the table below.

        Vehicle settings
        Tester Display Description Default Setting ECU
        Light sensor sensitivity Adjusts the sensitivity of the automatic light control system.*A 0 -2, -1, 0, +1 or +2 Main Body ECU (Multiplex Network Body ECU)
        Headlamps auto-off timer Keep the headlights on for a certain period of time after turning the engine switch off and closing all doors with the low beam headlights on. 30 sec. Off, 30 sec., 60 sec. or 90 sec. Main Body ECU (Multiplex Network Body ECU)
        Daytime running lights ON/OFF of the DRL function*1 On On or Off Main Body ECU (Multiplex Network Body ECU)
        Exterior lights off timer Changes the lighting time of the door mirror foot lights. 15 sec. Off, 7.5 sec., 15 sec. or 30 sec. Main Body ECU (Multiplex Network Body ECU)

        • *1: w/o Mirror Heater

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


        • *A

          A01D069E05
          *a Sensitivity of the automatic light control system
          *b Dark
          *c Bright
          *d Setting

    3. Customizing Lane Change Flasher Control


      1. Set lane change flasher control on/off by following the procedure below.


        • When setting the lane change flasher control to on, the number of blinks (3, 5 or 7) can be set.

        • When setting the lane change flasher control to off, the canceling method of the turn cancel function (canceling the lane change flasher by operating the headlight dimmer switch assembly in the same direction or the opposite direction) can be set.

        Tech Tips

        The default setting of the lane change flasher control is on and the number of blinks is 3.

        A01CZ4CC01
        *A for Light Control Switch LH Side Type - -
        *1 Headlight Dimmer Switch Assembly *2 Windshield Wiper Switch Assembly
        *a Right Turn *b Right Lane Change
        *c NEUTRAL *d Left Lane Change
        *e Left Turn *f Wiper Speed Switch Position P4
        *g Wiper Speed Switch Position P3 *h Wiper Speed Switch Position P2
        *i Wiper Speed Switch Position P1 *j OFF
        *k WPDN *l NEUTRAL
        *m WPUP *n HI
        A01D07RC02
        *A for Light Control Switch RH Side Type - -
        *1 Windshield Wiper Switch Assembly *2 Headlight Dimmer Switch Assembly
        *a Wiper Speed Switch Position P4 *b Wiper Speed Switch Position P3
        *c Wiper Speed Switch Position P2 *d Wiper Speed Switch Position P1
        *e OFF *f WPDN
        *g NEUTRAL *h WPUP
        *i HI *j Left Turn
        *k Left Lane Change *l NEUTRAL
        *m Right Lane Change *n Right Turn
        Step Operation Remark
        1

        1. Turn the power switch off.

        2. Move the windshield wiper switch assembly and headlight dimmer switch assembly to the NEUTRAL position.

        		 -
        2

        When setting the lane change flasher control to on:


        1. Set the number of blinks for the lane change flasher control.


          1. Refer to the following items and select wiper speed switch position P1, P2 or P3.


            1. Blinks 3 times: P1

            2. Blinks 5 times: P2

            3. Blinks 7 times: P3

        When setting the lane change flasher control to off:


        1. Select wiper speed switch position P4.

        		 Do not operate the wiper speed switch after step 3.
        3

        1. Move the windshield wiper switch assembly from the NEUTRAL position to the OFF position and hold it there.

        • Steps 3, 4 and 5 are operations for changing to lane change flasher setting mode.

        • If operations other than those described in steps 3, 4 or 5 are performed, the control will change to normal mode. Start from step 1 again.
        4

        1. Turn the power switch on (IG).
        5

        Perform the following operations:


        1. Keep the windshield wiper switch assembly in the OFF position for 5 seconds or more.

        2. Move the windshield wiper switch assembly from the OFF position to the WPDN position.

        3. Keep the windshield wiper switch assembly in the WPDN position for 5 seconds or more.

        4. Move the windshield wiper switch assembly from the WPDN position to the OFF position.

        5. Perform operations 1 to 3 again.

        6. Move the windshield wiper switch assembly from the WPDN position to the NEUTRAL position.
        6

        1. Check that the mode has changed to lane change flasher control setting mode.

          OK
          The right turn signal lights blink once.
        		While changing to lane change flasher control setting mode, wiper control and turn signal light control cannot be performed.
        7

        1. Confirm the selected setting (number of blinks) by performing the following operations:


          1. Move the headlight dimmer switch assembly from the NEUTRAL position to the left lane change position.

          2. Move the headlight dimmer switch assembly to the NEUTRAL position.

        1. Set and confirm the canceling method by performing the following operations:


          • Canceling by operating the lever in the opposite direction


            1. Move the headlight dimmer switch assembly from the NEUTRAL position to the left lane change position.

            2. Move the headlight dimmer switch assembly to the NEUTRAL position.


          • Canceling by operating the lever in the same direction


            1. Move the headlight dimmer switch assembly from the NEUTRAL position to the right lane change position.

            2. Move the headlight dimmer switch assembly to the NEUTRAL position.

        • If operations other than those described in step 7 are performed, the control will change to normal mode. Start from step 1 again.

        • Make sure to finish step 7 within approximately 20 seconds.
        8

        1. Check the answer back for completion of setting the number of blinks of the lane change flasher control.


          • Blinks 3 times

            OK
            The left turn signal lights blink once.

          • Blinks 5 times

            OK
            The left turn signal lights blink twice.

          • Blinks 7 times

            OK
            The left turn signal lights blink 3 times.

        1. Check the answer back for completion of changing the turn cancel function.


          • Canceling by operating the lever in the opposite direction

            OK
            The left turn signal lights blink 4 times.

          • Canceling by operating the lever in the same direction

            OK
            The left turn signal lights blink 5 times.

          If the answer back cannot be confirmed:

        • If 20 seconds or more had elapsed while performing step 7, the control will have changed to normal mode. Start from step 1 again.
        9 Setting is complete. Lane change flasher control setting mode changes to normal mode.