OUTER REAR VIEW MIRROR REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. PRECAUTION

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work.

   Click here

2. REMOVE BATTERY SERVICE HOLE COVER LH

   Click here

3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG

   Click here

5. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

   Click here

6. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

   Click here

7. REMOVE FRONT DOOR ARMREST COVER

   Click here

8. REMOVE COURTESY LIGHT ASSEMBLY

   Click here

9. REMOVE FRONT DOOR NO. 1 STIFFENER CUSHION

   Click here

10. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

11. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP

    Click here

12. REMOVE OUTER MIRROR CONTROL ECU ASSEMBLY (w/ Memory)

    Click here

13. REMOVE OUTER MIRROR PROTECTOR

    
    

    1. 

       Disengage the clamp and disconnect the wire harness.

    2. Remove the screw.

    3. Disengage the 2 claws and remove the outer mirror protector.

14. REMOVE OUTER MIRROR INSTALL HOLE COVER

    
    

    1. 

       Remove the outer mirror install hole cover.

15. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY

    
    

    1. w/o Memory:

       
       

       1. 

          Disconnect the connector.

    2. 

       Disengage the clamp.

    3. Remove the 3 nuts.

    4. 

       Disengage the claw and remove the outer rear view mirror assembly.