FRONT WIPER MOTOR INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Ensure that fingers or articles of clothing do not get caught in moving parts when performing this test.

PROCEDURE


  1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)

    A011MQFC03
    *a

    Component without harness connected

    (Windshield Wiper Motor Assembly)

    1. Check the LO operation.


      1. Connect a auxiliary battery positive (+) lead to terminal 5 (+1) and a negative (-) lead to terminal 4 (E), and check that the motor operates at low speed.

        OK
        Motor operates at low speed (LO).

    2. Check the HI operation.


      1. Connect a auxiliary battery positive (+) lead to terminal 3 (+2) and a negative (-) lead to terminal 4 (E), and check that the motor operates at high speed.

        OK
        Motor operates at high speed (HI).

        If the result is not as specified, replace the windshield wiper motor assembly.

  2. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)

    A011MQFC04
    *a

    Component without harness connected

    (Windshield Wiper Motor Assembly)

    1. Check the LO operation.


      1. Connect a auxiliary battery positive (+) lead to terminal 1 (+1) and a negative (-) lead to terminal 5 (E), and check that the motor operates at low speed.

        OK
        Motor operates at low speed (LO).

    2. Check the HI operation.


      1. Connect a auxiliary battery positive (+) lead to terminal 4 (+2) and a negative (-) lead to terminal 5 (E), and check that the motor operates at high speed.

        OK
        Motor operates at high speed (HI).

        If the result is not as specified, replace the windshield wiper motor assembly.