PROCEDURE
REMOVE FRONT WIPER ARM HEAD CAP
| *a | Protective Tape |
Using a screwdriver, disengage the 3 claws to remove the front wiper arm head cap.
Tech Tips
Tape the screwdriver tip before use.
Use the same procedure for the RH side and LH side.
REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH
Remove the nut and front wiper arm and blade assembly LH.
REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH
Remove the nut and front wiper arm and blade assembly RH.
REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
Disengage the 2 claws and separate the windshield outside moulding LH.
Disengage the 2 claws and separate the windshield outside moulding RH.
Remove the 2 clips.
Disengage the 8 guides as shown in the illustration.
Disengage the 9 guides and remove the cowl top ventilator louver sub-assembly as shown in the illustration.
REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
w/ Windshield Deicer System:
Disconnect the connector.
Disconnect the connector.
| *a | Motor Grommet |
Remove the 3 bolts.
Disengage the motor grommet as shown in the illustration and remove the windshield wiper motor and link assembly.
Note
Be careful not to damage the windshield when removing the windshield wiper motor and link assembly.
REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY
| *a | Protective Tape |
| *b | Pivot of the windshield wiper motor assembly |
Using a screwdriver, separate the windshield wiper link No. 1 rod from the pivot of the windshield wiper motor assembly as shown in the illustration.
Tech Tips
Tape the screwdriver tip before use.
Using a T30 "TORX" socket wrench, remove the 2 bolts and windshield wiper motor assembly from the windshield wiper link assembly.