CLOCK INSTALLATION

PROCEDURE

1. Click here

   INSTALL CLOCK ASSEMBLY

   
   

   1. Engage the 2 claws to install the clock assembly.

2. Click here

   INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

3. Click here

   INSTALL AIR CONDITIONING CONTROL ASSEMBLY

   Click here

4. Click here

   INSTALL METER HOOD SUB-ASSEMBLY

   Click here

5. Click here

   INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

   Click here

6. Click here

   CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

7. Click here

   INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

8. Click here

   CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

9. Click here

   INSTALL BATTERY SERVICE HOLE COVER LH

   Click here

10. Click here

    CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Click here