CLOCK REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work.

   Click here

2. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

   Click here

3. REMOVE BATTERY SERVICE HOLE COVER LH

   Click here

4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

6. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

   Click here

8. REMOVE METER HOOD SUB-ASSEMBLY

   Click here

9. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

   Click here

10. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

11. REMOVE CLOCK ASSEMBLY

    
    

    1. 

       Disengage the 2 claws and remove the clock assembly.