COMBINATION METER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

    Click here

  2. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Click here

  3. REMOVE BATTERY SERVICE HOLE COVER LH

    Click here

  4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  6. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

    Click here

  8. REMOVE METER HOOD SUB-ASSEMBLY

    Click here

  9. REMOVE COMBINATION METER ASSEMBLY


    1. A0020V9

      Remove the 4 screws.

    2. for Standard:


      1. A00212K

        Disengage the clamp.

      2. Disconnect each connector to remove the combination meter assembly.

    3. for Sport Package:


      1. A0022RJ

        Disengage the clamp.

      2. Disconnect each connector to remove the combination meter assembly.