COMBINATION METER ASSEMBLY
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| K3-2 (MSM+) - Body ground | L - Body ground | Steering pad switch assembly signal | Power switch on (IG), enter, top and back switches on steering pad switch assembly not pushed | 4.8 to 5.2 V |
| K3-3 (MSTI) - Body ground | P - Body ground | Steering pad switch assembly signal | Power switch on (IG), up, down, right and left switches on steering pad switch assembly not pushed | 4.8 to 5.2 V |
| K3-4 (ODO) - Body ground | L - Body ground | ODO/TRIP switch signal | Power switch on (IG), ODO/TRIP switch not pushed | 4 to 6 V |
| Power switch on (IG), ODO/TRIP switch pushed | Below 1 V | |||
| K3-6 (PBKL) - Body ground | P - Body ground | Front passenger seatbelt buckle switch signal | Power switch on (IG), front passenger seat belt unfastened | Below 1 V |
| Power switch on (IG), front passenger seat belt fastened | 11 to 14 V | |||
| K3-7 (PODS) - Body ground | V - Body ground | Occupant detection sensor signal | Power switch on (IG), front passenger seat not occupied | Below 1 V |
| Power switch on (IG), front passenger seat occupied | 11 to 14 V | |||
| K3-9 (S) - Body ground | LG - Body ground | Oil pressure signal | Idling | 11 to 14 V |
| Power switch on (IG) | Below 1 V | |||
| K3-12 (RRSB) - Body ground*2 | R - Body ground | Rear seat belt indicator light RH signal | Power switch on (IG), rear seat belt warning light RH off | 11 to 14 V |
| Power switch on (IG), rear seat belt warning light RH on | Below 1 V | |||
| K3-13 (RCSB) - Body ground*2 | W - Body ground | Rear seat belt indicator light center signal | Power switch on (IG), rear seat belt warning light center off | 11 to 14 V |
| Power switch on (IG), rear seat belt warning light center on | Below 1 V | |||
| K3-14 (RLSB) - Body ground*2 | G - Body ground | Rear seat belt indicator light LH signal | Power switch on (IG), rear seat belt warning light LH off | 11 to 14 V |
| Power switch on (IG), rear seat belt warning light LH on | Below 1 V | |||
| K3-15 (OILW) - Body ground | GR - Body ground | Engine oil level signal | Power switch on (IG), engine oil level not low | 11 to 14 V |
| Power switch on (IG), engine oil level low | Below 1 V | |||
| K3-16 (WLVL) - Body ground | V - Body ground | Washer fluid level signal | Power switch on (IG), washer fluid level not low | 11 to 14 V |
| Power switch on (IG), washer fluid level low | Below 1 V | |||
| K3-19 (+S) - Body ground | L - Body ground | Speed signal for other system (Output) | Power switch on (IG), wheel being rotated | Pulse generation (See waveform 1) |
| K3-20 (SI) - Body ground | V - Body ground | Speed signal for other system (Input) | Power switch on (IG), wheel being rotated | Pulse generation (See waveform 1) |
| K3-21 (IG+) - Body ground | B - Body ground | Power switch signal | Power switch off | Below 1 V |
| Power switch on (IG) | 11 to 14 V | |||
| K3-22 (B) - Body ground | LG - Body ground | Auxiliary battery | Power switch off | 11 to 14 V |
| K3-25 (TR) - Body ground | P - Body ground | Trip switch signal | Power switch on (IG), up switch and down switch of trip switch not pushed | 4 to 6 V |
| Power switch on (IG), up switch or down switch of trip switch pushed | Below 1 V | |||
| K3-26 (SW3) - Body ground | W - Body ground | Ground for trip switch | Always | Below 1 Ω |
| K3-27 (FR) - K3-28 (FE) | SB - GR | Fuel level signal | Power switch on (IG), fuel level warning off | Below 1 V |
| Power switch on (IG), fuel level warning on | 4.5 to 9 V | |||
| K3-29 (CANH) - Body ground | LG - Body ground | CAN communication line | - | - |
| K3-30 (CANL) - Body ground | B - Body ground | CAN communication line | - | - |
| K3-31 (ES) - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
| K3-35 (RLMT) - Body ground*2 | L - Body ground | Rear seat belt buckle switch LH signal | Power switch on (IG), rear seat belt LH unfastened | Below 1 V |
| Power switch on (IG), rear seat belt LH fastened | 11 to 14 V | |||
| K3-36 (RCMT) - Body ground*2 | W - Body ground | Rear seat belt buckle switch center signal | Power switch on (IG), rear seat belt center unfastened | Below 1 V |
| Power switch on (IG), rear seat belt center fastened | 11 to 14 V | |||
| K3-37 (RRMT) - Body ground*2 | R - Body ground | Rear seat belt buckle switch RH signal | Power switch on (IG), rear seat belt RH unfastened | Below 1 V |
| Power switch on (IG), rear seat belt RH fastened | 11 to 14 V | |||
| K3-39 (ILL-) - Body ground | BE - Body ground | Illumination signal | Headlight dimmer switch off | Below 1 V |
| Headlight dimmer switch in tail or head position | Pulse generation | |||
| K3-40 (EP) - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
| K4-2 (MSCL) - Body ground | P - Body ground | Local bus communication line | - | - |
| K4-3 (MSCH) - Body ground | V - Body ground | Local bus communication line | - | - |
| K4-4 (ER) - Body ground | P - Body ground | RH turn indicator light signal (Input) | Power switch on (IG), RH turn signal switch off | 11 to 14 V |
| Power switch on (IG), RH turn signal switch on | Below 1 V | |||
| K4-5 (EL) - Body ground | GR - Body ground | LH turn indicator light signal (Input) | Power switch on (IG), LH turn signal switch off | 11 to 14 V |
| Power switch on (IG), LH turn signal switch on | Below 1 V | |||
| K4-7 (LR) - Body ground | R - Body ground | RH turn indicator light signal (Output) | Power switch on (IG), RH turn indicator light off | Below 1 V |
| Power switch on (IG), RH turn indicator light blinking | 11 to 14 V ←→ Below 1 V | |||
| K4-8 (B) - Body ground | B - Body ground | Auxiliary battery | Power switch off | 11 to 14 V |
| K4-11 (HZSW) - Body ground | W - Body ground | Hazard warning signal switch signal (Input) | Power switch on (IG), hazard warning signal switch not pressed | 11 to 14 V |
| Power switch on (IG), hazard warning signal switch pressed | Below 1 V | |||
| K4-12 (HAZM) - Body ground | B - Body ground | Hazard warning signal switch signal (Output) | Power switch on (IG), hazard warning signal switch not pressed | 11 to 14 V |
| Power switch on (IG), hazard warning signal switch pressed | Below 1 V | |||
| K4-13 (LL) - Body ground | G - Body ground | LH turn indicator light signal (Output) | Power switch on (IG), LH turn indicator light off | Below 1 V |
| Power switch on (IG), LH turn indicator light blinking | 11 to 14 V ←→ Below 1 V | |||
| K130-1 (GVIF) - Body ground*1 | B - Body ground | Video signal (Digital) | - | - |
*1: w/ Navigation System
*2: w/ Rear Seat Belt Warning
Waveform 1 (Reference):
| Item | Condition |
|---|---|
| Tool setting | 5 V/DIV., 20 ms./DIV. |
| Vehicle condition | Power switch on (IG), wheel being rotated |
Tech Tips
When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.