FOOTWELL LIGHT(for Front Side) INSPECTION

PROCEDURE


  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH


    1. A011M2AC19
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly LH)

      Apply auxiliary battery voltage to the connector and check that the No. 1 interior illumination light LH comes on.

      OK
      Measurement Condition Condition Specified Condition

      Auxiliary battery positive (+) → 1 (B)

      Auxiliary battery negative (-) → 2 (E)

      		 Always No. 1 interior illumination light LH comes on

      If the result is not as specified, replace the bulb or No. 1 interior illumination light assembly LH.

  2. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH


    1. A011M2AC19
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly RH)

      Apply auxiliary battery voltage to the connector and check that the No. 1 interior illumination light RH comes on.

      OK
      Measurement Condition Condition Specified Condition

      Auxiliary battery positive (+) → 1 (B)

      Auxiliary battery negative (-) → 2 (E)

      		 Always No. 1 interior illumination light RH comes on

      If the result is not as specified, replace the bulb or No. 1 interior illumination light assembly RH.