PERSONAL LIGHT REMOVAL

PROCEDURE


  1. REMOVE MAP LIGHT ASSEMBLY


    1. A011PO8

      Using a moulding remover, disengage the 4 clips and 2 guides.

    2. Disconnect the connector to remove the map light assembly.

  2. REMOVE OUTER ROOM LIGHT LENS


    1. A011PDKC02
      B003YLR Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 3 claws and 3 guides to remove the outer room light lens from the map light sub-assembly.

  3. REMOVE MAP LIGHT BULB


    1. A011MWF

      Turn the 3 map light sockets with the 3 map light bulbs as shown in the illustration to remove them as a unit.

    2. Remove the 3 map light bulbs from the 3 map light sockets.

  4. REMOVE THEFT WARNING ULTRASONIC SENSOR (w/ Intrusion Sensor)

    Click here

  5. REMOVE TELEPHONE MICROPHONE ASSEMBLY

    Click here